XPRESS CLEAR COATS

Two products with a shared aim - be the most efficient, versatile and high quality clear coat available. The ultimate bodyshop lacquer!

ProXL

XPRESS405

A premium HS rapid cure clear coat, with unique Anti-Scratch technology. The perfect product for bodyshops looking for a blend of high performance and economical quality.

Product Page

ProXL

XPRESS605

The ultimate rapid cure VHS clear coat. Xpress605 is a VOC 420 compliant lacquer, with over 60% solids content, providing both a great application experience and great finish.

Product Page

INCREASED THROUGHPUT

Rapid curing of 5 minutes at 60ºC, giving up to 70% energy savings and greater body shop throughput
Superior gloss depth eliminates the need for polishing
Increase throughput, reduce energy costs and achieve superior results with ease.

EASE OF APPLICATION

Long open time, allowing for applications of all sizes, from SMART repairs to full resprays
Simple 2:1 mix, a single hardener, no extra thinners or any additives needed
Easily achieved gun finish
Easy to polish if required

HIGH GLOSS FINISH

Excellent flow out
No gloss drop– an excellent lasting finish with no die-back

XPRESS605

PRODUCT BROCHURE

ProXL

XPRESS605 TDS

ProXL

XPRESS405 TDS

ProXL

FIND YOUR STOCKIST

XPRESS605

Body Shop Reviews

XPRESS605 5 minutes clear is really nice stuff! Goes on nice and has a nice gloss level.

Sunny Yip - Car body repair and Automotive product development technician

I painted a full side with the new XPRESS605 and it applies really nicely! Initially I thought that it was quite thin but amazingly it applied really well and I didn’t feel like it was going to run easily. Gloss held up very nicely and didn’t nip in, which I was really happy with.

Rachel Murray - Freelance Refinisher & Owner of Paint by Rach

We tried the XPRESS605 on several different type of jobs and always got excellent results, baked for 5 minutes at 60°c with no gloss drop. One job I painted a show car bonnet and got an outstanding gun finish and after 3 months there was no drop in gloss. I normally use the Novol Spectral 565-00 but I'm very happy to recommend this as a better product."

Richard - J D Autos (www.jd-autos.co.uk)

I did a complete respray with the XPRESS605 and it was lovely to spray. It stayed open for a good time so gave no dry edges – got an outstanding off the gun finish with excellent gloss hold up after baking, A few nibs needed polishing out bit these were very easy , much easier than other clears such as Max 0396.

Sean - S C H Coachworks

I found the XPRESS605 very easy to use, gives a great gun finish with no gloss drop. I simply baked at 60°c for 5 minutes ....... such a saving on energy and time!

Wayne - Penfold Panels